china CORRTECH Cathodic Protection Technology Company -

china CORRTECH Cathodic Protection Technology Company

Showing 11 - 16 of 16, total 2 pages [First] [Previous] [Next] [Last]

si-fe rod anode
Specification: General Specification
Detail: General Specification Type Dimension Surface Area Weight KTS-R01 25 x 300 0.023 1.5 KTS-R02 38 x 900 0.12 7.5 KTS-R03 38 x 1200 0.16 10 KTS-R04 38 x 1500 0.20 13 KTS-R05 50 x 900 0.16 13.5 KTS-R...

si-fe tubular anode
Specification: General Specification
Detail: Co***re with the solid rod anode, tube anodes can: 1. Minimize the resistance of anodes to electrolytes. 2. Increase the surface to weight ratio, thus can reduce current density and distribute the produced gases over large...

transformer rectifier
Specification: Working temperatures: -20 ~ +50
Detail: KT series transformer rectifier is a kind of automatic controlled transformer, used as the DC power for impressed current cathodic protection, manufactured according to IEC146 standard. With the advantages of stable operati...

prepackaged mg anode (environment safe)
Specification: Gypsum: 75% ,Bentonite: 20%, Anhydrous Sodium Sulphate: 5%
Detail: Above bare Mg anodes could be supplied after being prepackaged. The bare Mg anodes will be assembled with cable and sealed with epoxy resin, and packaged in cotton bag. As the prepackaged anodes are buried under the ground...

standard potential magnesium anodes
Specification: H-1 alloy
Detail: In average soil conditions, H-1 alloy, commonly known as standard potential magnesium, is an excellent choice in cathodic protection systems. Typically, CorrTech H-1 anodes produce a minimum open circuit potential of 1.52 volt...

high silicon cast iron anode
Specification: ASTM A518-86(grade 3) standard
Detail: This kind of anodes according to ASTM A518-86(grade 3) standard. They are made by Chill Cast technology, and have much higher performance and better quality than normal sand mould casting.


Showing 11 - 16 of 16, total 2 pages [First] [Previous] [Next] [Last]
1 2